Gasification

Technology
Technology details
Name:	Gasification
Category:	Conversion (Thermochemical processes and technologies)
Feedstock:	Garden and Park waste (lignocellulosic biomass, dry organic fraction of municipal solid waste)
Product:	Producer gas, Syngas

Gasification is the conversion of a solid or liquid organic compound in a gas phase and a solid phase. The gas phase, usually called 'syngas' or 'producer gas', has a high heating power and can be used for power generation or biofuel production. The solid phase, called char, includes the organic unconverted fraction and the inert material present in the treated feedstock. The syngas produced is a gas mixture of carbon monoxide (CO), hydrogen (H₂), methane (CH₄), and carbon dioxide (CO₂), as well as light hydrocarbons, such as ethane and propane, and heavier hydrocarbons, such as tars. Undesirable gases, such as sulphidric (H₂S) and chloridric acid (HCl), or inert gases, such as nitrogen (N₂), can be present in the syngas. Conversion of organic material is achieved by exposing the feedstock to high temperatures, typically 700°C - 1100°C in the presence of a gasifying agent. The gasifying agents used are air, oxygen, steam or a mixture thereof.

Gasification of organic material offers several advantages. The produced syngas can be more efficient than direct combustion of the original feedstock, and can be used for multiple applications, such as heat and electricity generation, including high temperature heat for industry, for mechanical energy, as transport fuel, as raw material for chemicals, and when cleaned and upgraded to near pure methane, can be injected into the grid.

Feedstock

Origin and composition

Usually, gasifiers use wood and other lignocellulosic biomass. It can also be designed to convert the dry organic fraction of municipal solid waste (MSW). Depending on the nature of the organic material, the presence of the moisture content generally varies from 5% to 35%.

Pre-treatment

• Sizing (e.g., chipping, grinding)
• Drying

Process and technologies

Gasification process

The principal reactions of the gasification are endothermic and the necessary energy for their occurrence is granted by the oxidation of part of the organic material, through an allo-thermal or an auto-thermal phase. In the auto-thermal process, the gasifier is internally heated through partial combustion, while in the allo-thermal process the energy required for the gasification is supplied externally. Considering the auto-thermal system, gasification can be seen as a sequence of several stages. The main steps of the gasification process are:

1. Oxidation (exothermic stage)
2. Drying (endothermic stage)
3. Pyrolysis (endothermic stage)
4. Reduction (endothermic stage)

Oxidation

The partial oxidation of the feedstock is necessary to obtain the thermal energy required for the endothermic stages of the process in order to maintain the operative temperature at the required value. The oxidation phase is carried out in near oxygen free conditions in order to oxidize only part of the feedstock. The main reactions that take place during the oxidation phase are the following:

${\ce {C + O2 -> CO2}}$ ΔH = -349 kJ/mol (Char combustion)

${\ce {C + 1/2O2-> CO}}$ ΔH = -111 kJ/mol (Partial oxidation)

${\ce {H2 + 1/2O2 -> H2O}}$ ΔH = -242 kJ/mol (Hydrogen combustion)

The main product of this phase is thermal energy, while the combustion product is a gas mixture of CO, CO₂ and water.

Drying

During the drying phase, the moisture contained in the feedstock is evaporated. The amount of heat required is proportional to the feedstock moisture content. Generally, the heat required derives from the other stages of the process.

Pyrolysis

Pyrolysis is the thermochemical decomposition of organic compounds. In particular, the cracking of chemical bonds takes place with the formation of three different fractions: a solid, a liquid and a gaseous fraction. The pyrolysis reaction takes place with a temperature in the range of 250-700°C. It is an endothermic reaction and, as in the drying step, the heat required comes from the oxidation process. The pyrolysis of organic material can be schematized with the following overall reaction:

${\ce {Biomass <=> H2 + CO + CO2 + CH4 + H2O + Tar + Char}}$

Since the feedstock is made of biomass and cellulose is its main component, in this reaction the biomass can be indicated with the chemical formula of cellulose (i.e., C₆H₁₀O₆)

Reduction

The reduction step involves the reaction between the products of the preceding stages of pyrolysis and oxidation, which results in the formation of the final syngas. The main reactions occurring during the reduction step are as follows:

${\ce {C + CO2 +<-> 2 CO}}$ (Boudouard reaction)

${\ce {C + H2O <-> CO +H2}}$ (Reforming of the char)

${\ce {CO + H2O <-> CO2 + H2}}$ (Water gas shift reaction)

${\ce {C + 2H2 <-> CH4}}$ (Methanation)

Gasification technologies

The reactors to gasify a pre-treated feedstock, called gasifiers, essentially differ from one another for mode of contact between the feed material and the gasifying agent, mode and rate of heat transfer, and residence time of the fed material into the reaction zone. Different technological solutions can be implemented to obtain different configurations. Principally, the mode of contact may be in counter-current, co-current, or cross flow, and the heat can be transferred from the outside or directly in the reactor using a combustion agent. The residence time can be in the order of hours (static gasifiers) or minutes (fluidized bed gasifiers). The main reactors used in the biomass gasification process are as follows:

1. Entrained flow reactor
2. Fixed bed reactor, either updraft (counter-current) or downdraft (co-current)
3. Fluidized bed reactor, either bubbling fluidized bed or circulating fluidized bed
4. Rotary kiln reactor
5. Plasma reactor

Product

The syngas product has a lower heating value (LHV) that ranges from 4 to 13 MJ/Nm³, depending on the feedstock, the gasification technology and the operational conditions. Syngas can be processed for obtaining secondary products as heat, electricity, chemicals, bioethanol (via syngas fermentation ), and biodiesel (via Fischer-Tropsch-Synthesis), depending on the type of conversion technology.

Technology providers

Technology comparison

Company name	Country	Technology category	Technology name	TRL	Capacity [kg/h]	Heating	Reactor	Gasifying agent	Feedstock: Food waste	Feedstock: Garden & park waste
Company 1	[Country HQ location]	[Technology category (if different sub-categories are defined this has to be specified here, the available categories can be found on each technology page under the chapter Process and technologies)]	[Technology name (the "branded name" or the usual naming from company side)]	[4-9]	[numeric value]				●	●
Company 2	[Country HQ location]	[(if different sub-categories are defined this has to be specified here, the available categories can be found on each technology page under the chapter Process and technologies)]	[Technology name (the "branded name" or the usual naming from company side)]	[4-9]	[numeric value]				●	●

ANDRITZ Oy

Gasification provider

General information
Company:	ANDRITZ Oy
Country:
Contact:
Webpage:
Technology and process details
Technology name:	ANDRITZ Carbona pressurized gasification technology	Technology category:	Conversion (Thermochemical processes and technologies)
TRL:	8-9	Capacity:	kg·h-1
Atmosphere:		Catalyst:	Air, oxygen
Reactor:	Fluidized bed reactor	Temperature:	°C
		Other:
Feedstock and product details
Feedstock:	Woody biomass	Product:	Syngas, char

Meva Energy AB

Gasification provider

General information
Company:	MEVA Energy AB
Country:	Sweden (Pitea, Hortlax plant)
Contact:
Webpage:	https://www.mevaenergy.com
Technology and process details
Technology name:	MEVA Technology	Technology category:	Conversion (Thermochemical processes and technologies)
TRL:	7-8	Capacity:	1000 kg·h-1
Atmosphere:		Catalyst:	Air
Reactor:	Entrained-flow cyclone	Temperature:	800-1000 °C
		Other:
Feedstock and product details
Feedstock:	Crushed pellets, sawdust	Product:	Biochar, electricity & heat

Open access pilot and demo facility providers

Pilots4U Database

Patents

Currently no patents have been identified.