Coating and lamination

Technology
Technology details
Name:	Coating and lamination
Category:
Feedstock:	Paints, plastics, ...
Product:	Coating

Coating and lamination are material technologies where a coating or laminate is placed on a material surface to cover this substrate. Lamination is a finishing process in which a plastic film from a roll is bonded to a substrate such as paper, cardboard or aluminum foil. To ensure good adhesion, the process is carried out at elevated temperatures and pressures, both of which are applied via heated rollers (continuous) or presses (discountinuous). In coating, material surfaces are combined with a thermoplastic layer to form a composite material which is bondend together. The purpose of applying the coating or lamination may be functional (e.g., improved strenght and stability), decorative (e.g., aesthetic), or both.

Feedstock

Origin and composition

Coating and lamination are secondary processes where different kinds of coatings like paints or laminates are used. The coatings can be totally or partly derived from biogenic origin and may be based on biowaste resources.

Process and technologies

Types of coatings

Coatings and laminates can be materials of different types depending on the purpose and application technology used. These can be:

• oils or oily liquid coatings
• paints, lacquers with solvents
• polymeric materials
• carbon black, metals, silicates and other anorganic materials

In the focus of this page are coatings and laminates that are derived from biogenic origin and can - at least in the future - be derived from biowaste. This includes mainly organic materials that contain oils, solvents and polymers.

Application technologies

Depending on the type of coating or laminate there are different types of application technologies:

Product

Products of coating and lamination processes are surfaces covered with a material.

• bio-based low-density polyethylene (LDPE) coating
• Bio-PE

Technology providers

Technology comparison

Company name	Country	Technology category	Technology name	TRL	Capacity [kg/h]	Viscosity range [Pa·s]	Feedstock: Food waste	Feedstock: Garden & park waste
Company 1	[Country HQ location]	[Technology category (if different sub-categories are defined this has to be specified here, the available categories can be found on each technology page under the chapter Process and technologies)]	[Technology name (the "branded name" or the usual naming from company side)]	[4-9]	[numeric value]		●	●
Company 2	[Country HQ location]	[(if different sub-categories are defined this has to be specified here, the available categories can be found on each technology page under the chapter Process and technologies)]	[Technology name (the "branded name" or the usual naming from company side)]	[4-9]	[numeric value]		●	●

Company 1

Coating and lamination provider

General information
Company:
Country:
Contact:
Webpage:
Technology and process details
Technology name:		Technology category:	Post-processing (Material processes and technologies)
TRL:		Capacity:	kg·h-1
Mechanical properties:		Solvents:
Temperature:	°C	Tensile properties:
Viscosity range:	Pa·s	Other:
Feedstock and product details
Feedstock:		Product:

Centre technique du papier (CTP)

Wet lamination of microfibrillated cellulose (MFC)

Open access pilot and demo facility providers

Pilots4U Database

Patents

Currently no patents have been identified.